vault backup: 2026-06-03 10:13:33

2026-06-03 10:13:33 -04:00
parent 10fa6b6d32
commit 9af316db55
17 changed files with 18 additions and 18 deletions
@@ -11,7 +11,7 @@ title: Emergency Systems Research
 > * [[two-way-takeoff]]
 > * [[distributed-antenna-systems-takeoff]]

-[[wiring-method-selection]]
+[[conest-wiring-method-selection]]

 1. Find Fire Alarm plans (if present)
 2. Locate the following rooms:
@@ -13,7 +13,7 @@ aliases:
 # Distributed Antenna Systems (DAS) Takeoff

 > [!important]
-> Complete [[emergency-systems-research]] before beginning takeoff.
+> Complete [[conest-emergency-systems-research]] before beginning takeoff.

 > [!info]
 > See [[emergency-communications-systems]] for information
@@ -12,7 +12,7 @@ aliases:

 > [!important]
 > Complete [[pre-takeoff-research]],
-> including [[wiring-method-selection]] and [[wiring-device-research]],
+> including [[conest-wiring-method-selection]] and [[conest-wiring-device-research]],
 > before beginning takeoff.

 > [!tip]
@@ -64,7 +64,7 @@ When using length-based assemblies use adders per [[feeders-takeoff]].

 #### Flex

-[[wiring-method-selection#Liquidtight Flex]]
+[[conest-wiring-method-selection#Liquidtight Flex]]

 %%

@@ -13,7 +13,7 @@ up: "[[takeoff-scripts]]"

 > [!important]
 > Complete [[pre-takeoff-research]],
-> including [[wiring-method-selection]],
+> including [[conest-wiring-method-selection]],
 > before beginning takeoff.

 ## Execution
@@ -11,7 +11,7 @@ aliases:
 # Fire Alarm Takeoff

 > [!important]
-> Complete [[emergency-systems-research]] before beginning takeoff.
+> Complete [[conest-emergency-systems-research]] before beginning takeoff.

 > [!info]
 > This note is intended for practice specific to [[pdi-estimating]].
@@ -82,7 +82,7 @@ BASED ON THE ACTUAL ROUTING IN THE FIELD.

 ### Wiring Method Selection

-[[wiring-method-selection]]
+[[conest-wiring-method-selection]]

 > [!cite] E.0.X.1 - "ELECTRICAL NOTES" Note 32
 > ALL WIRING SHALL BE INSTALLED IN LISTED METALLIC RACEWAYS.
@@ -12,7 +12,7 @@ aliases:

 > [!important]
 > Complete [[pre-takeoff-research]],
-> including [[low-voltage-raceway-selection]]
+> including [[conest-low-voltage-raceway-selection]]
 > before beginning takeoff.

 > [!info]
@@ -54,10 +54,10 @@ Seek to use the cheapest method
 and Database Administrator),
 as allowed for the situation.

-* [[wiring-method-selection]]
-* [[wiring-device-research]]
-* [[emergency-systems-research]]
-* [[low-voltage-raceway-selection]]
+* [[conest-wiring-method-selection]]
+* [[conest-wiring-device-research]]
+* [[conest-emergency-systems-research]]
+* [[conest-low-voltage-raceway-selection]]

 ## General

@@ -24,7 +24,7 @@ Route from panel to center of the room.

 ### Wiring Method Selection

-[[wiring-method-selection#Multi-Circuit Homeruns]]
+[[conest-wiring-method-selection#Multi-Circuit Homeruns]]

 ### Voltage Drop

@@ -10,7 +10,7 @@ daily: "[[2025-10-15]]"
 # 2025-10-15 09:32:00

 %%
-Content extracted from [[wiring-method-selection]],
+Content extracted from [[conest-wiring-method-selection]],
 timestamp based on my teams message to Joel.
 %%

@@ -11,7 +11,7 @@ daily: "[[2026-03-03]]"

 ## Stairwell Wiring Method Selection

-[[wiring-method-selection]]
+[[conest-wiring-method-selection]]

 I have had a tendency to use EMT assemblies in stairwells
 (fixtures, unit heaters, etc.)
@@ -10,7 +10,7 @@ daily: "[[2026-04-07]]"

 ## Feeder Wiring Method Selection

-Relevant to [[feeders-takeoff]] and [[wiring-method-selection]]:
+Relevant to [[feeders-takeoff]] and [[conest-wiring-method-selection]]:

 PVC is only an option if:
 * conduit size is not larger than allowed by slab thickness,
@@ -11,7 +11,7 @@ aliases:
 # Two-Way Takeoff

 > [!important]
-> Complete [[emergency-systems-research]] before beginning takeoff.
+> Complete [[conest-emergency-systems-research]] before beginning takeoff.

 > [!info]
 > See [[emergency-communications-systems]] for information
@@ -19,7 +19,7 @@ aliases:

 > [!important]
 > Complete [[pre-takeoff-research]],
-> including [[wiring-method-selection]] and [[wiring-device-research]],
+> including [[conest-wiring-method-selection]] and [[conest-wiring-device-research]],
 > before beginning takeoff.

 1. [[conest-project-setup#Create Unit Matrix|Create Unit Matrix]]