ZaneMeyers/zmVault
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

vault backup: 2026-01-12 11:18:59

Browse Source
This commit is contained in:
Zane Meyers
2026-01-12 11:18:59 -05:00
parent 76479bcedd
commit f811d9ac91
42 changed files with 169 additions and 119 deletions
Download Patch File Download Diff File Expand all files Collapse all files
nfpa-70_215_feeders.md
+6 -6
View File
@@ -218,19 +218,19 @@ Where a feeder is supplied from a dc system operating at more than 60 volts, eac
* (a) Positive Polarity, Sizes 6 AWG or Smaller. Where the positive polarity of a dc system does not serve as the connection for the grounded conductor, each positive ungrounded conductor shall be identified by one of the following means:
* (1) A continuous red outer finish
* (2) A continuous red stripe durably marked along the conductor's entire length on insulation of a color other than green, white, gray, or black
* (3) Imprinted plus signs (+) or the word POSITIVE or POS durably marked on insulation of a color other than green, white, gray, or black, and repeated at intervals not exceeding 610 mm (24 in.) in accordance with 310.8(B)
* (4) An approved permanent marking means such as sleeving or shrink-tubing that is suitable for the conductor size, at all termination, connection, and splice points, with imprinted plus signs (+) or the word POSITIVE or POS durably marked on insulation of a color other than green, white, gray, or black
* (b) Negative Polarity, Sizes 6 AWG or Smaller. Where the negative polarity of a dc system does not serve as the connection for the grounded conductor, each negative ungrounded conductor shall be identified by one of the following means:
* (1) A continuous black outer finish
* (2) A continuous black stripe durably marked along the conductor's entire length on insulation of a color other than green, white, gray, or red
* (3) Imprinted minus signs (--) or the word NEGATIVE or NEG durably marked on insulation of a color other than green, white, gray, or red, and repeated at intervals not exceeding 610 mm (24 in.) in accordance with 310.8(B)
* (4) An approved permanent marking means such as sleeving or shrink-tubing that is suitable for the conductor size, at all termination, connection, and splice points, with imprinted minus signs (--) or the word NEGATIVE or NEG durably marked on insulation of a color other than green, white, gray, or red