vault backup: 2025-08-05 17:00:05

.obsidian/graph.json

@@ -1,6 +1,6 @@
 {
   "collapse-filter": false,
-  "search": "",
+  "search": "-tag:#type/media -tag:#type/media-commentary",
   "showTags": false,
   "showAttachments": false,
   "hideUnresolved": true,
@@ -27,6 +27,13 @@
         "a": 1,
         "rgb": 6443744
       }
+    },
+    {
+      "query": "tag:#systems",
+      "color": {
+        "a": 1,
+        "rgb": 14701138
+      }
     }
   ],
   "collapse-display": false,

.obsidian/plugins/excalibrain/data.json

@@ -232,7 +232,8 @@
     "README.md",
     "systems.md",
     "electrical.md",
-    "lighting-controls.md"
+    "lighting-controls.md",
+    "full-takeoff.md"
   ],
   "allowOntologySuggester": true,
   "ontologySuggesterParentTrigger": "::p",

Untitled.canvas

@@ -0,0 +1 @@
+{}

Untitled.md

@@ -0,0 +1,11 @@
+1. RETAIL TENANT ELECTRICAL SERVICE SHALL BE DERIVED FROM TENANT METERS IN THE MAIN ELECTRICAL ROOM.
+   REFER TO ELECTRICAL DISTRIBUTION DIAGRAM ON SHEET E-401.
+   ELECTRICAL CAPACITY IS BASED ON THE FOLLOWING PROVISIONS:
+    1. SIX RETAIL TENANTS ANTICIPATED WITH THE FOLLOWING ELECTRICAL SERVICE.
+       (2)200A, (3)400A, AND (1)6OOA AT 480V/3PH.
+       PROVIDE THE FOLLOWING CONDUITS FOR EACH SPACE
+       WHICH INCLUDES SPARE CONDUIT FOR ADDITIONAL 200A METER FOR FLEXIBILITY.
+    2. EACH 200A SERVICE SHALL BE PROVIDED WITH (2) 2 1/2” EMPTY CONDUITS FROM MAIN ELECTRICAL ROOM TO RETAIL SPACE.
+    3. EACH 400A SERVICE SHALL BE PROVIDED WITH (3) 2 1/2” EMPTY CONDUITS FROM MAIN ELECTRICAL ROOM TO RETAIL SPACE.
+    4. EACH 600A SERVICE SHALL BE PROVIDED WITH (2) 3” AND (1) 2 1/2” EMPTY CONDUITS FROM MAIN ELECTRICAL ROOM TO RETAIL SPACE.
+    5. GALLERY SERVICE SHALL BE PROVIDED WITH 200A WIRING AND CONDUIT.

area-of-refuge.md

@@ -0,0 +1,48 @@
+---
+id:
+aliases:
+  - area-of-rescue
+  - two-way-communication
+tags:
+  - occupational
+  - occupational/systems/standalone-systems
+---
+# Area of Refuge (AoR)
+
+## Info
+
+> [!info] Also Known As
+> * Area of Rescue
+> * 2-Way Communication
+
+## Sequence
+
+### 1. Estimate preparation
+
+Complete [[fire-alarm]] preparation and takeoff.
+
+### 2. Takeoff
+
+##### Horizontal
+
+> Area: Same as Fire Command Room
+
+`FIRE ALARM & DAS SYSTEMS`/`TWO WAY COMMUNICATION ASSEMBLIES`/`...`
+
+* Length: Per drawings if shown, otherwise use longer of
+    * FCR to elevator lobbies
+    * FCR to stairwells
+* Count: Number of boxes run to. Per drawings if shown, otherwise use the greater of:
+    * Count of elevators
+    * Count of stairwells
+
+##### Vertical
+
+> Area: "Typical - Building All Levels"
+
+`FIRE ALARM & DAS SYSTEMS`/`TWO WAY COMMUNICATION ASSEMBLIES`/`...`
+
+* Length: 15ft x per count
+* Count: match Horizontal
+ 
+### 3. Extension (Review and Checking)

automating-pdf-annotation.md

@@ -8,6 +8,8 @@ tags:
 ---
 # Automating PDF Annotation
 
+See [[portable-tools]] for valid dependencies.
+
 ## Extract Bluebeam Markups
 
 Right now I'm exporting Bluebeam markups to csv before processing,

blank-system.md

@@ -0,0 +1,18 @@
+---
+id:
+aliases: []
+tags:
+  - occupational
+  - occupational/systems
+---
+# Blank System
+
+## Info
+
+## Sequence
+
+### 1. Estimate preparation
+
+### 2. Takeoff
+
+### 3. Extension (Review and Checking)

construction-estimating-using-excel.md

@@ -4,7 +4,7 @@ aliases: []
 tags:
   - type/media-commentary
 ---
-# *Construction Estimating Using Excel*
+# _Construction Estimating Using Excel_
 
 Construction Estimating Using Excel
 (Peterson MBA PE, Steven)

construction-estimating.md

@@ -55,3 +55,33 @@ weighted by the organizational desire to win the project.
 $$
 {E}[P]=
 $$
+
+## Misconceptions
+
+### Standard Practices
+
+In general, many things thought to be standard are quite the opposite.
+
+* Use of square receptacle symbols
+
+### Proposals
+
+Proposals are not legally binding,
+which is a double edged sword
+for intermediate subcontractors like electrical:
+
+* Proposals to GC's can be withdrawn for any reason
+* Proposals from subcontractors can be withdrawn for any reason
+
+This is obviously not popular practice,
+however it is important to recognize
+that errors aren't set in stone
+until a contract is signed.
+
+Destigmatizing proposal retraction is of critical concern for subcontractors.
+See [[estimating-culture]] for more on estimate error game theory.
+
+It's important to recognize that retracting a proposal
+may upset a few people employed by the GC,
+but consider how little your own opinion matters to your company's strategic decisions.
+Much bigger people are involved after the proposal is accepted.

design-build-budget.md

@@ -7,30 +7,35 @@ tags:
 ---
 # Design Build Budget
 
+## Info
+
+Design build budgets are used when project documentation
+is insufficient for [[full-takeoff]].
+
 ## Sequence
 
 ### 2. Takeoff
 
 #### Misc Budgets
 
-From [[misc-budgets]], takeoff:
+* [[misc-budgets#Temporary Power & Lighting]]
-
+* [[misc-budgets#Irrigation Pumps]]
-* Temporary Power & Lighting
-* Irrigation
 
 #### Feeders
 
 ##### Primaries & Secondaries
 
-See [[feeders]].
+* [[feeders#Primaries]]
+* [[feeders#Secondaries]]
 
 ##### Feeders
 
-Budget per Unit Count. Compare to Bid Sheet.
+Budget per Unit Count.
+Compare to Bid Sheet.
 
-Alternate method as described by Joel:
+> [!info] Alternate method as described by Joel
-Takeoff unit risers normally
+> Takeoff unit risers normally
-with length * 1.5 to cover house panel feeders.
+> with Length * 1.5 to cover house panel feeders.
 
 #### Switchgear
 
@@ -44,5 +49,5 @@ See [[switchgear#Generator]].
 
 Budget per Unit Count. Compare to Bid Sheet.
 
-Alternate method as described by Joel:
+> [!info] Alternate method as described by Joel
-Takeoff per [[subfeeds]], use average for length.
+> Takeoff per [[subfeeds]], use average for length.

distributed-antenna-systems.md

@@ -0,0 +1,81 @@
+---
+id:
+aliases:
+  - das
+tags:
+  - occupational
+  - occupational/systems/standalone-systems
+---
+# Distributed Antenna Systems (DAS)
+
+## Info
+
+### Emergency Responder Radio Communication Systems (ERRCS)
+
+### Cellular Systems
+
+Less common than ERRCS are "cellular DAS" systems
+
+## Sequence
+
+### 1. Estimate preparation
+
+Complete [[fire-alarm]] preparation and takeoff.
+
+### 2. Takeoff
+
+#### FACR to Every Elev. Shaft
+
+FACR TO ELEV PIT = 2" PVC40
+CA.28.31.5
+
+Match Fire Alarm takeoff Length and Count
+
+#### FACR to Every Staircase
+
+FACR TO STAIRWELL = 2" PVC40
+CA.28.31.8
+
+Match Fire Alarm takeoff Length and Count
+
+#### Stairwell Riser Every 2 Floors
+
+STAIRWELL RISER EVERY 2 FLRS = 1 1/2" EMT (20') W/ 16X16X6 BOX
+CA.28.31.12
+
+Create a Stairwell typical on every other floor
+
+#### FACR to Electric Room
+
+FACR TO 2HR-RATED RM = 2" PVC40
+CA.28.31.14
+
+Match Fire Alarm takeoff Length
+
+#### Electric Room Riser to Every Floor
+
+2HR-RATED RM RISER TO EVERY FLR = 2" EMT (15') W/ 16X16X6 BOX
+CA.28.31.18
+
+Takeoff in every Electric Room
+
+#### Top 2H Rated Room To Roof
+
+FACR TO ROOF = 2" EMT W/ RMC WEATHERHEAD & IMC STUB
+CA.28.31.18
+
+Use 15' or Height of ceiling on last building level
+
+#### Horizontal
+
+CORRIDORS EMT OH = 1 1/2" EMT W/ 16X16X6 BOX EVERY 80'
+CA.28.31.23
+
+CORRIDORS DECK = 1 1/2" PVC40, STUBBY, FLEX W/ 16X16X6 BOX EVERY 80'
+CA.28.31.21
+
+1-1/2 through corridors w/ 16x16x6 J-Box
+
+Length for every corridor/garage
+
+### 3. Extension (Review and Checking)

electrical.md

@@ -2,7 +2,8 @@
 id: electrical
 aliases: []
 tags:
-  - systems/electrical
+  - occupational
+  - occupational/systems/electrical
 ---
 # Electrical
 

estimating-ergonomics.md

@@ -1,7 +1,10 @@
 ---
+id:
+aliases: []
 tags:
   - estimating
   - software
+  - type/idea
 ---
 # Estimating Ergonomics
 
@@ -119,7 +122,7 @@ that Trimble or anybody else has.
 Something that I've realized that really bothers me
 about the the traditional methods
 (e.g. database-based takeoff, audit-trail-type-abstraction)
-is the the *enforced linearity*,
+is the the _enforced linearity_,
 which is at odds with the reality of takeoff.
 
 No matter how you slice it,

estimating-misconceptions.md

@@ -1,33 +0,0 @@
----
-tags:
- - estimating
----
-# Estimating Misconceptions
-
-## Standard Practices
-
-In general, many things thought to be standard are quite the opposite.
-
-* Use of square receptacle symbols
-
-## Proposals
-
-Proposals are not legally binding,
-which is a double edged sword
-for intermediate subcontractors like electrical:
-
-* Proposals to GC's can be withdrawn for any reason
-* Proposals from subcontractors can be withdrawn for any reason
-
-This is obviously not popular practice,
-however it is important to recognize
-that errors aren't set in stone
-until a contract is signed.
-
-Destigmatizing proposal retraction is of critical concern for subcontractors.
-See [[estimating-culture]] for more on estimate error game theory.
-
-It's important to recognize that retracting a proposal
-may upset a few people employed by the GC,
-but consider how little your own opinion matters to your company's strategic decisions.
-Much bigger people are involved after the proposal is accepted.

feeder-verification.md

@@ -6,7 +6,9 @@ tags:
   - occupational
   - type/idea
 ---
-# Feeder Verification Automation
+# Feeder Verification
+
+## Sequence
 
 > * Filter by Feeders system in Takeoff
 > * Highlight everything and copy into excel
@@ -15,6 +17,8 @@ tags:
 > * Redo the same process but with USF, Primaries, and Secondaries
 > * Save as and rename to NAME - Feeder Verification in the PSN folder
 
+## Automation
+
 Breakdown selection is straightforward.
 
 To select all takeoffs:

feeders.md

@@ -2,7 +2,8 @@
 id: feeders
 aliases: []
 tags:
-  - systems/feeders
+  - occupational
+  - occupational/systems/feeders
 ---
 # Feeders
 
@@ -84,4 +85,36 @@ Provide sleeves for all feeder conduits passing through floors.
     * M = Metal => Wood Frame
     * Round 1" to 2"
 
+#### Grounding
+
+This is intended to cover electrical and telecom grounding.
+
+##### System Grounding
+
+> Area: "01 - Feeders/Risers Building"
+
+`COMMON ASSEMBLIES`/`GROUNDING`/`GND = #3/0 & 1" CONDUIT - EMT`
+
+* Length: Measure around the main electrical rooms to stacked
+* Count: Total number of electrical rooms
+
+`COMMON ASSEMBLIES`/`GROUNDING`/`(3) ... x 10' CU CLAD GRD ROD & 4"X12" GND BAR`
+
+* Count: 1
+
+##### Riser
+
+> Area: "Typical - Building All Electrical Riser Rooms"
+
+`COMMON ASSEMBLIES`/`GROUNDING`/`GND = #3/0 & 1" CONDUIT - EMT`
+
+* Length: 15
+* Count: 1
+
+##### Telecom Ground Bridge
+
+Use only where shown.
+
+`COMMON ASSEMBLIES`/`GROUNDING`/`TELE/DATA GND BRIDGE, ..., W/ COVER & (60') #6 THHN GREEN`
+
 ### 3. Extension (Review and Checking)

fire-alarm.md

@@ -2,7 +2,8 @@
 id:
 aliases: []
 tags:
-  - systems/fire-alarm
+  - occupational
+  - occupational/systems/fire-alarm
 ---
 # Fire Alarm
 
@@ -75,7 +76,7 @@ FACR TO STAIRWELLS 1" PVC (CA.30.22.17)
 
 ##### Terminal Cabinets
 
-TERMINAL CABINETS (2) 2" EMT/PVC (CA.30.26. __)
+TERMINAL CABINETS (2) 2" EMT/PVC (CA.30.26.X)
 
 Horizontal:
 * Measure from the Fire Command room to all electrical rooms
@@ -143,82 +144,6 @@ _Design Build:_
 Take off both FA and Electrical
 * Misc Assemblies
 
-#### Area of Refuge (AoR) / Two-Way
-
-PROPOSAL "STAND ALONE SYSTEMS"
-
-CA.31.27. 4/7
-
-##### Horizontal
-
-Take off once
-* Length:
-    * If shown on Plans (FA/Systems/ etc.)
-    * based on FCR to Elevator Lobbies & FCR to Stairwells* (Whichever is longer)
-* Count: Number of boxes run to. If not shown, use the largest count between Elev. & Strwlls.
-
-##### Vertical
-
-Typical on all floors
-* Length: 15ft x per count
-* Count: match Horizontal
-
-#### Responder Radio / DAS
-
-##### FACR to Every Elev. Shaft
-
-FACR TO ELEV PIT = 2" PVC40
-CA.28.31.5
-
-Match Fire Alarm takeoff Length and Count
-
-##### FACR to Every Staircase
-
-FACR TO STAIRWELL = 2" PVC40
-CA.28.31.8
-
-Match Fire Alarm takeoff Length and Count
-
-##### Stairwell Riser Every 2 Floors
-
-STAIRWELL RISER EVERY 2 FLRS = 1 1/2" EMT (20') W/ 16X16X6 BOX
-CA.28.31.12
-
-Create a Stairwell typical on every other floor
-
-##### FACR to Electric Room
-
-FACR TO 2HR-RATED RM = 2" PVC40
-CA.28.31.14
-
-Match Fire Alarm takeoff Length
-
-##### Electric Room Riser to Every Floor
-
-2HR-RATED RM RISER TO EVERY FLR = 2" EMT (15') W/ 16X16X6 BOX
-CA.28.31.18
-
-Takeoff in every Electric Room
-
-##### Top 2H Rated Room To Roof
-
-FACR TO ROOF = 2" EMT W/ RMC WEATHERHEAD & IMC STUB
-CA.28.31.18
-
-Use 15' or Height of ceiling on last building level
-
-##### Horizontal
-
-CORRIDORS EMT OH = 1 1/2" EMT W/ 16X16X6 BOX EVERY 80'
-CA.28.31.23
-
-CORRIDORS DECK = 1 1/2" PVC40, STUBBY, FLEX W/ 16X16X6 BOX EVERY 80'
-CA.28.31.21
-
-1-1/2 through corridors w/ 16x16x6 J-Box
-
-Length for every corridor/garage
-
 ### 3. Extension (Review and Checking)
 
 * Sleeving

fixture-designations.md

@@ -2,7 +2,8 @@
 id:
 aliases: []
 tags:
-  - systems/fixtures
+  - occupational
+  - occupational/systems/fixtures
 ---
 # Fixture Designations
 

fixtures.md

@@ -2,7 +2,8 @@
 id:
 aliases: []
 tags:
-  - systems/fixtures
+  - occupational
+  - occupational/systems/fixtures
 ---
 # Fixtures
 

full-takeoff.md

@@ -7,11 +7,13 @@ tags:
 ---
 # Full Takeoff
 
+## Info
+
 ## Sequence
 
 ### 1. Estimate preparation
 
-[[project-setup]]
+Complete [[project-setup]].
 
 ### 2. Takeoff
 
@@ -29,7 +31,7 @@ tags:
 7. [[telecom]]
 8. [[low-voltage]]
 9. [[fire-alarm]]
-10. [[lightning-protection]]
+10. [[standalone-systems]]
 11. [[misc-budgets]]
 
 ### 3. Extension (Review and Checking)

lighting-controls.md

@@ -2,13 +2,16 @@
 id: 
 aliases: []
 tags:
-  - systems/electrical
+  - occupational
+  - occupational/systems/electrical
 parent: [[electrical]]
 ---
 # Lighting Controls
 
 ## Information
 
+### Methods
+
 > [!info] Lighting Control Technologies
 > * Triac (Line voltage dim)
 > * Analog (0-10V dim)

lightning-protection.md

@@ -2,7 +2,8 @@
 id:
 aliases: []
 tags:
-  - systems/lightning-protection
+  - occupational
+  - occupational/systems/lightning-protection
 ---
 # Lightning Protection
 

low-voltage.md

@@ -2,7 +2,8 @@
 id:
 aliases: []
 tags:
-  - systems/low-voltage
+  - occupational
+  - occupational/systems/low-voltage
 ---
 # Low Voltage
 

misc-budgets.md

@@ -2,7 +2,8 @@
 id:
 aliases: []
 tags:
-  - systems
+  - occupational
+  - occupational/systems
 ---
 # Misc Budgets
 
@@ -62,7 +63,7 @@ BidItem = "3 - Building"
 * Takeoff: `ITEM DATABASE`/`TEMPORARY POWER`/`* - TEMPORARY LIGHTING / PWR PNL (PER BLDG AREA SFT)`
   * _Count_ = Garage SF
 
-## Irrigation pumps
+## Irrigation Pumps
 
 ```
 Area = "2 - Site"

powershell-document-conversion-module.md

@@ -15,6 +15,8 @@ as well as allow ~~common high-level actions on them.~~
 > [!note]
 > Cmdlets should be written to accept multiple input files where appropriate.
 
+See [[portable-tools]] for valid dependencies.
+
 ## `Convert-Document`
 
 * pandoc
@@ -72,4 +74,10 @@ function Import-XML {
 
 `*.SupplierLink.xml`
 
-## `Unblock-Excel`
+## `Unblock-Document`
+
+Excel sheet protection
+
+## `Where-Document`
+
+Filter by metadata. etc.

risk-oriented-estimating.md

@@ -73,3 +73,7 @@ will inevitably _treat them as descriptive_.
 | ------------------- | ------------- |
 | Hi-Hat              | Daisy-Chain   |
 | Furnished By Others | Rough-In Only |
+
+## Going Further
+
+[[functional-labor-factoring]]

standalone-systems.md

@@ -0,0 +1,22 @@
+---
+id:
+aliases: []
+tags:
+  - occupational
+  - occupational/systems/standalone-systems
+---
+# Standalone Systems
+
+## Info
+
+## Sequence
+
+### 1. Estimate preparation
+
+### 2. Takeoff
+
+1. [[distributed-antenna-systems]]
+2. [[area-of-refuge]]
+3. [[lightning-protection]]
+
+### 3. Extension (Review and Checking)

subfeeds.md

@@ -2,7 +2,8 @@
 id:
 aliases: []
 tags:
-  - systems/subfeeds
+  - occupational
+  - occupational/systems/subfeeds
 ---
 # Subfeeds
 

switchgear.md

@@ -2,7 +2,8 @@
 id:
 aliases: []
 tags:
-  - systems/switchgear
+  - occupational
+  - occupational/systems/switchgear
 ---
 # Switchgear
 
@@ -72,9 +73,9 @@ Use a Distribution Panel of equal amps.
 
 Use 1200A MTS/ATS, and add:
 
-- ==CA.33.14.AMPS==
+* ==CA.33.14.AMPS==
-- Factor 1 = 3
+* Factor 1 = 3
-- ==Delete 1200A==
+* ==Delete 1200A==
 
 #### Meter Centers
 

systems.md

@@ -1,12 +1,14 @@
 ---
 id:
 aliases:
-  - '#systems'
+  - '#occupational/systems'
 tags:
-  - systems
+  - occupational/systems
 ---
 # Systems
 
+[[blank-system]]
+
 * [[electrical]]
 * [[feeders]]
 * [[fire-alarm]]

telecom.md

@@ -2,7 +2,8 @@
 id:
 aliases: []
 tags:
-  - systems/telecom
+  - occupational
+  - occupational/systems/telecom
 ---
 # Telecom
 

units.md

@@ -2,7 +2,8 @@
 id:
 aliases: []
 tags:
-  - systems/units
+  - occupational
+  - occupational/systems/units
 ---
 # Unit Takeoff
 
@@ -43,44 +44,15 @@ tags:
     * bus amps
 
 2. Read about the project specifications and construction type
-  * wood or metal studs
+  * partition framing (wood or metal studs)
-  * wiring methods
+  * stud depth
-      * NM or MC
+  * wiring methods (NM or MC)
-  * wiring device plates
+  * wiring device plates (decora or standard)
-      * Decora or Standard
+  * wiring device specs (are 15A devices allowed or minimum N5-20R)
-  * wiring device specs
-      * are 15A devices allowed?
   * equipment (20A Kitchen and bath)
 
 1. Fill out OneNote
 
-#### Load Centers
-
-| Rating  | Assembly                                                                           |
-| ------- | ---------------------------------------------------------------------------------- |
-| <= 100A | `DIST PANELS & UNIT LOAD CENTERS`/`UNIT LOAD CENTERS - ...`/`... UNIT LOAD CENTER` |
-|  > 100A | `DIST PANELS & UNIT LOAD CENTERS`/`UNIT LOAD CENTERS - ...`/`... BREAKER PNL`      |
-
-#### Shade Control
-
-#### "High-Lows"
-
-`COMMON ASSEMBLIES`/`TELECOM SYSTEMS`/`UNIT DATA  - TELECOM`/`HIGH-LOW - TV SCOOP 1 1/2" ENT - NO CABLE`
-
-#### Air Sealing
-
-* LEED Silver
-* Draft Proof Box
-* Mid-Atlantic jobs
-
-`ITEM DATABASE`/`BOSES & CABINETS`/`BOXES - VAPOR`
-
-`COMMON ASSEMBLIES`/`UNITS - MC CABLE ASSEMBLIES`/`GENERAL  ASSEMBLIES - METAL STUD`/`UNIT MISC ITEMS - MC - ADJUST ACCORDINGLY`
-
-#### Islands
-
-`COMMON ASSEMBLIES`/`UNITS - MC CABLE ASSEMBLIES`/`1x 15A 125V TR DUP DECORA (METAL STUD) - 20' 3/4" PVC, ENT, 3#12 THHN`
-
 ### 2. Takeoff
 
 > [!tip] Preparing for Unit Takeoff
@@ -100,6 +72,41 @@ tags:
 > and creating them new for each unit,
 > since the types required can vary greatly between units.
 
+#### Load Centers
+
+| Rating  | Assembly                                                                           |
+| ------- | ---------------------------------------------------------------------------------- |
+| <= 100A | `DIST PANELS & UNIT LOAD CENTERS`/`UNIT LOAD CENTERS - ...`/`... UNIT LOAD CENTER` |
+|  > 100A | `DIST PANELS & UNIT LOAD CENTERS`/`UNIT LOAD CENTERS - ...`/`... BREAKER PNL`      |
+
+#### Shade Control
+
+#### "High-Lows"
+
+`COMMON ASSEMBLIES`/`TELECOM SYSTEMS`/`UNIT DATA  - TELECOM`/`HIGH-LOW - TV SCOOP 1 1/2" ENT - NO CABLE`
+
+#### Air Sealing
+
+* LEED Silver
+* Mid-Atlantic jobs
+* "Draft Proof Box"
+
+`ITEM DATABASE`/`BOXES & CABINETS`/`BOXES - VAPOR`/`...`
+
+`COMMON ASSEMBLIES`/`UNITS - MC CABLE ASSEMBLIES`/`GENERAL  ASSEMBLIES - METAL STUD`/`UNIT MISC ITEMS - MC - ADJUST ACCORDINGLY`
+
+#### Islands
+
+`COMMON ASSEMBLIES`/`UNITS - MC CABLE ASSEMBLIES`/`1x 15A 125V TR DUP DECORA (METAL STUD) - 20' 3/4" PVC, ENT, 3#12 THHN`
+
+#### Bidet Toilets, Whirlpool Baths, etc.
+
+`COMMON ASSEMBLIES`/`MECHANICAL CONNECTIONS (UP TO 100A)`/`PVC - LT NM FLEX (CARFLEX)`/`20A 1PH MECH CONN (100') 3/4" PVC 3#12 - CARFLEX`
+
+#### Telecom Homeruns
+
+Included in MSDE.
+
 ### 3. Extension (Review and Checking)
 
 1. Scroll through with Area selected and make sure there is takeoff for each unit type